Access to EMTP user presentations, webinars, and slide deck presentations.
page 1 of 3
14 presentations for parameters:
Author(s): Jegadeesh Kumar
Type:Technical Presentation
Downloaded: 12
Date: 2022-09-01
Insulation coordination study of 220 kV transmission line for reliability improvement against lightning-induced overvoltages
Abstract
This presentation shows a detailed insulation coordination verification using EMTP. It includes an accurate representation of transmission line components considering actual site data such as conducto... see more
Tag(s): Insulation Coordination, Lightning Strike, LIOV, Line Surge Arresters, Back-Flashover
Author(s): Frédéric Colas
Type:Technical Presentation
Date: 2021-09-05
From FEMM to EMTP Cable Data – How to Use FEMM to Compute the Power Cable Parameters
Abstract
In the context of the simulation of an electrical network, different models of lines / cables are available. Among these, we can cite the PI models, the frequency dependent models (FD-Line) or the mod... see more
Tag(s): fem, cable, parameters
Author(s): Pr. Bozidar Filipovic
Type:Technical Presentation
Date: 2021-09-03
Impact of Power Transformer Energization on Relay Protection Operation
Abstract
One of the main causes of the incorrect operation of transformer relay protection are inrush currents. The transient inrush current occurs when energizing the unloaded transformer, and it is a consequ... see more
Tag(s): transformer, energization, inrush, differential, protection, harmonics, bctran, pamsuite
Author(s): Bikrant Poudel
Type:Technical Presentation
Date: 2021-09-02
Optimization of Control Parameters of Grid-Connected PV System in EMTP
Abstract
It is observed that the controller gain parameters of the PV model have a significant impact on the PV plant’s response during the fault recovery and the PV plant’s interaction with the rest of th... see more
Tag(s): pv plant, ibr, pso, optimization, scripting, pll, inverter control, inverter based resources, DER
Author(s): Ivo Uglesic
Type:Technical Presentation
Date: 2021-09-02
Measurement and EMTP Simulation of Ferroresonance Phenomenon
Abstract
Ferroresonance is difficult to predict because its occurrence in the power system depends on several parameters, some of which are unknown (parasitic capacities). In addition, measuring electrical con... see more
Tag(s): ferroresonance, tov, saturation